Tsurumi Semi Vortex Wastewater 2" Submersible Pump

Tsurumi Semi Vortex Wasterwater Submerisble Pump

1. Semi-vortex urethane Rubber impeller with agitator suspends solids and allows for pumping of sand and stringy material.
Applications : Residential, commercial, industrial dewatering and site drainage.

2. Hightly efficient, continuous duty air filled, copper wound motor with class B, insulation minimizes the cost of operation.
Applications : Decorative waterfalls and fountains.

3. Built in thermal protection prevents motor failure due to overloading, accidental run-dry and single phasing in three phase units.
Applications : Raw water supply from lakes or rivers.

4. Double inside mechanical seals with silicon carbide faces (both top and bottom) running in an oil filled chamber provide for one the most durable seal designs available.
Applciations : Sediment removal from small sumps of basins.

5. Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life or 60,000 hours provide for extend operational life

Specifications :
Discharge Size : 2"Npt (50 mm)
Horsepower Range : 1/2 Hp. (.4Kw)
Capacity : 15 - 50 Gpm (.056 - .19 cubic metre/min)
Head : 5 Ft. - 34 Ft. (1.5 - 10.3 m)
Maximum water temperature : 104 F. (40 C.)
Materials of Construction
Casing : Ductile Cast Iron
Impeller :  Urethane Rubber
Shaft : 403 Stainless Steel
Motor Frame : Aluminum alloy
Fasteners : 304 Stainless Steel
Mechanical Seal
Upper seal : Ceramic / Carbon
Lower seal : Silicon Carbide
Elastomers : NBR (Nitril Buna Rubber)
Impeller Type : Semi-vortex, solids handling
Solids Handling Capability : 1" x 3/8"
Bearings : Prelubricated, Double Shielded
Motor Nomenclature
Type, Speed, Hz : Air Filled, 3600 Rpm, 50 Hz.
Voltage, Phase : 230V Single phase
Insulation : Class B
Accessories : Submersible Power Cable 16' (4.87 m)
Operational Mode : Manual